https://www.thelongbeachnews.com/rss/author/shotblastmachine Long Beach Local News - shotblastmachine en Copyright 2025 The Long Beach News - All Rights Reserved. https://www.thelongbeachnews.com/5-points-of-the-projection-angle-of-the-shot-blasting-machine https://www.thelongbeachnews.com/5-points-of-the-projection-angle-of-the-shot-blasting-machine Tue, 15 Jul 2025 07:09:08 +0600 shotblastmachine shot blasting machine, steel shot, shot blast machine, shot blasting equipment, shot blasting machinery, abrasive blasting, abrasive blast cleaning, blast cleaning system Five points of the projection angle of the shot blasting machine

I believe that everyone will encounter some small problems when using theshot blasting machineto clean up. This article will give you some knowledge about the use of shot blasting machines. Today, Let's talk about a few points of the knowledge about the projection angle of the shot blasting machine.

1. Place a slightly rusted steel plate or one with marking on the shot blaster area.
2. Start the shot blasting machine and accelerate the motor to the appropriate speed.
3. Open the shot blasting gate with the control valve (manual). After about 5 seconds, the abrasives are sent to the impeller, and therust on the steel plate is removed.
4. Determine the position of the projectile. Use a 19mm adjustable wrench to loosen the three hex bolts on the platen until the directional sleeve can be rotated by hand, and then tighten the directional sleeve.
5. Prepare a new projectile map to verify the best settings.

]]>